AMT Datasouth Fastmark 4600 PLUS Series User's guide User's Guide download pdf (Page 45)

Serial (RS-232) Port

The required cable must have a nine-pin "D" type male connector on one end,

which is plugged into the mating serial port located on the back of the printer. The

other end of the cable connects to a serial port on the host computer. For

technical and pin-out information, please refer to the Technical Reference in this

manual.

Note:

1. Centronics allows a much higher communication speed than serial.

2. The pin assignment of serial cable is different from PC.

Please contact your local reseller if you need

this cable.

Ethernet 10/100 Internal Printer Server Option

This connector is for Ethernet application; it is convenient to use several printers

by Ethernet connector at the same time.

Note:

When using Ethernet model printer, please wait till the

Ready Indicator to stop blinking, before starting printer

operations.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 90 91

No comments

AMT Datasouth Fastmark 4600 PLUS Series User's guide User's Guide Page 45