AMT Datasouth Fastmark 4600 PLUS Series User's guide User's Guide download pdf (Page 42)

Printing a Configuration Report

To perform a self-test and print a configuration report:

1. Turn off the printer.

2. Press and hold the FEED button while turning on the power.

3. When “SELF-TESTING …” is displayed on the LCD and the READY

indicator blinks, release the FEED button.

NOTE: Printers with Ethernet will take 20 second for this process, the

PAUSE button must be pressed during that period.

4. The printer prints out a configuration report.

5. When “READY” is displayed on the LCD , the READY indicator stops

blinking but remains illuminated.

6. The following information is printed in the report:

 Font list

 Hardware configuration and status

 Label parameters

 Firmware version

Notes:

After the self-test the printer enters the diagnosis mode (Dump mode). To

continue to normal operation, press CANCEL button to cancel the diagnosis mod

(Dump mode).

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 90 91

No comments

AMT Datasouth Fastmark 4600 PLUS Series User's guide User's Guide Page 42